Find The Walkera Runner 250 Spare Parts Here!

Walkera Runner 250 Spare Parts Battery Fixed Plate Runner

It is not easy to find the spare parts of many drones that are in the market. No matter how popular the drone is, the spare parts are really scarce. Not that there are no spare parts, there are not much stores where you can get them. Not all online stores that sell the drones have their spare parts.

Walkera offers not just the drones, but also the spare parts of all the device they sell. You don’t need to look for them elsewhere. You will find all the parts that might need a replacement sometime or later. Don’t rush anywhere, simply visit the official site of Walkera.

Walkera Runner 250

Walkera Runner 250 is a racing drone with fast speed with accurate signal control. The peculiarity is that you can get the basic Walkera Runner 250 and make it into any specifications with additions from the options of battery, FPV, camera, radio control unit and Goggle options.

The significance of the spare parts is more with Runner 250 as it helps you make your own racing drone with a specific combination of your choice. By making your own specifications and modules, it is extremely important to maintain the good condition of the device. Spare parts come extremely significant at this time.

After all Walkera Runner 250 is a racing drone that is prone to accidents or mishaps that can damage the unit. You can find all sorts of parts right from the screws to the carrying bag with the name to match your device. Let’s see what the spare parts of Walkera Runner 250 are.


The motor is the major part of a drone without which the aircraft cannot function. The Runner 250 has got 4 different options for the motor. All are brushless motors that can function smooth. The choices are CW and CCW. The former will have its shafts for tightening rotating in clockwise direction and the other CCW is counter clock wise. The motor and propellers should not be rotating in the same direction. You will need 4 such motors for the Runner 250 to start flying. They are also available as single pieces when needed.

Attach the brushless ESC to the respective motor to enable the power regulation to each of these motors. Remember, one ESC motor can control only one motor.

  • Brushless motor (CW)
  • Brushless Motor (CCW)
  • (CW) Brushless ESC
  • Brushless ESC (CCW)


Runner 250 propellers: The propellers come above the motors on the 4 arms. The spare propellers are available as a set of 2 that has one propeller each for the rear and front that rotates in opposite directions. They are also available in 2 sets, 4 sets, 10 sets and 20 sets.

Body parts

The Runner 250 looks nothing short of an assorted body parts like that in a lego. Don’t get surprised but that works perfect. The body parts could be divided into many and most of these are available as spare parts as well.

  • Rear motor fixed plate
  • Front motor fixed plate
  • Battery fixed plate
  • Camera fixed plate


The motor fixed plates are where the motors would come. The plates are different for these sides. These fixed plates are ready mount sans the screws which you need to get separately. The battery plate keeps the battery in place and the camera plate is where you will be fixing the GoPro camera on the top.

  • Upper main board
  • Bottom main board


These are the skeleton of the body of Runner 250. These boards keep all the other parts in its place. Screw these boards on its place and you are good to go.

Control boards

The control boards are the next main thing of this racing drone. They are inside the upper and lower main boards. Each and every main part of it is available at Walkera shop.

Main control board is a small box which is the computer of the drone. This box controls all the functions of the drone and keeps it going. It is here the signals from the transmitter is processed and sent to the motors.

Power board is where the LED lights, antenna signal, and all the working of the drone is connected and situated.

OSD module is to show the telemetry function. It transmits data and enables the display on the FPV screen. This module comes with its installation keys in its package.

  • Buzzer
  • Transmission
  • Receiver antenna fixing mount


TX5816 (FCC) Transmitter is to helps surf the channels from the radio. It enables the real time feed of images and videos from the drone camera to the FPV goggles or the screen. This is in compliance with the FCC versions.

Runner 250 Mushroom antenna is for the 5.8Ghz video transmitter. It can work with the FPV transmitter of the Runner 250 and also connect with iLook cameras as well.

Other accessories

Screw set is the complete set of screws that are needed to make a Walkera Runner 250 racing drone.

Runner 250 battery is the Walkera 2200mAh lithium polymer battery. it was allow the drone to fly for a maximum of 14 minutes on air. it comes with the charger.

Red LED light comes as a set of 2. These red colored lights go at the rear end to enable better visibility of the drone. This enables the pilot to see the drone easily and continue its orientation.

Runner 250 Backpack: Finally, a carry bag for your precious racing drone. This backpack is named Runner 250. It is perfect for you to take the drone anywhere. Backpack fits the foam packaging of the drone inside it. It is made of tough vinyl with heavy duty zippers.

There are different pockets to hold the batteries, radio and other accessories in it. There are carry handles and comfortable back straps. The dimensions are 470 x 360 x 110mm with a weight of about 750 grams.

Bottom Line

The Runner 250spare parts are not exclusively available at Walkera shop. They are also available in other stores as well. Surf through those stores to get the right deal for you. The parts are made o carbon fibers which is a sturdy material. You may not want the spare parts unless you are making one yourself.


  1. After checking out a number of the blog posts on your web page, I seriously like your way of writing a blog.
    I saved as a favorite it to my bookmark website list and will be checking back soon.
    Take a look at my website too and tell me your opinion.

  2. Just desire to say your article is as surprising. The clarity
    in your post is just spectacular and i can assume you
    are an expert on this subject. Well with your permission let me to
    grab your feed to keep up to date with forthcoming post.
    Thanks a million and please carry on the enjoyable work.

  3. Hmm it appears like your site ate my first comment (it was extremely long) so I guess I’ll just sum
    it up what I wrote and say, I’m thoroughly enjoying your
    blog. I as well am an aspiring blog blogger but I’m still
    new to everything. Do you have any recommendations for
    beginner blog writers? I’d genuinely appreciate it.

  4. Hi it’s me, I am also visiting this website on a regular basis, this
    website is in fact pleasant and the viewers are really sharing good thoughts.

  5. Hi i am kavin, its my first time to commenting anyplace, when i read this piece
    of writing i thought i could also create comment due to this sensible article.

  6. I think this is one of the most significant information for me.
    And i am glad reading your article. But should remark on some general
    things, The site style is wonderful, the articles is really excellent
    : D. Good job, cheers

  7. I was curious if you ever considered changing the page layout of your website?
    Its very well written; I love what youve got to say.
    But maybe you could a little more in the way of content so people could connect with
    it better. Youve got an awful lot of text for only having 1 or 2
    pictures. Maybe you could space it out better?

Leave a Reply

Your email address will not be published. Required fields are marked *

three × 1 =